ricoh aficio 400-500 free download

File name aficio 400-500 A133-A217 SM.PDF

® ® ® A133/A217 SERVICE MANUAL RICOH GROUP COMPANIES PN: RCFM0400 ® ® ® A133/A217 SERVICE MANUAL A133 A217 FIELD SERVICE MANUAL PN: RCFM0400 LEGEND PRODUCT CODE COMPANY RICOH SAVIN GESTETNER A133 Aficio 400 9940DP 2640E A217 Aficio 500 9950DP 2850E DOCUMENTAION HISTORY REV. NO. DATE COMMENTS * 6/96 Original Printing 1 11/97 A217 Addition 2 7/98 A612 Addition IMPORTANT SAFETY NOTICES PREVENTION OF PHYSICAL INJURY 1. Before disassembling or assembling parts of the copier and peripherals, make sure that the copier power cord is unplugged. 2. The wall outlet should be near the copier and easily accessible. 3. Note that some components of the copier and the paper tray unit are supplied with electrical voltage even if the main switch is turned off. 4. If any adjustment or operation check has to be made with exterior covers off or open while the main switch is turned on, keep hands away from electrified or mechanically driven components. 5. If the start key is pressed before the copier completes the warm-up period (Start key starts blinking red and green alternatively), keep hands away from the mechanical and the electrical components as the copier starts making copies as soon as the warm-up period is completed. 6. The inside and the metal parts of the fusing unit become extremely hot while the copier is operating. Be careful to avoid touching those components with your bare hands. HEALTH SAFETY CONDITIONS 1. Never operate the copier without the ozone filters installed. 2. Always replace the ozone filters with the specified ones at the specified intervals. 3. Toner and developer are non-toxic, but if you get either of them in your eyes by accident, it may cause temporary eye discomfort. Try to remove with eye drops or flush with water as first aid. If unsuccessful, get medical attention. OBSERVANCE OF ELECTRICAL SAFETY STANDARDS 1. The copier and its peripherals must be installed and maintained by a customer service representative who has completed the training course on those models. + CAUTION 2. The RAM board on the system control board has a lithium battery which can explode if replaced incorrectly. Replace the battery only with an identical one. The manufacturer recommends replacing the entire RAM board. Do not recharge or burn this battery. Used batteries must be handled in accordance with local regulations. FSM a A133/A217 SAFETY AND ECOLOGICAL NOTES FOR DISPOSAL 1. Do not incinerate the toner bottle or